The Ford Barn - View Single Post - Door lock mechanism drawings on a slant window

jbc · 06-09-2013, 04:42 PM

This is a follow up on an earlier thread. The outside right side handle on my Slant Window will not turn. I have used the correct locking handler, a back door handle, even a screw driver. But the striker moves in no more than an 1/8 th of an inch. With the inside handle I get full travel of the striker. The locking handle works fine off the car with the key so that's not the problem. There has to be some problem in the door mechanism. I was told someone on the forum has a drawing of this locking mechanism. I sure don't want to take the door panel off on a freshly painted and upholstered car. Can anyone help.
Thank
John
352 208 6359 or
[email protected]

06-09-2013, 04:42 PM	#1
jbc Senior Member Join Date: May 2011 Location: ocala fl Posts: 160	Door lock mechanism drawings on a slant window This is a follow up on an earlier thread. The outside right side handle on my Slant Window will not turn. I have used the correct locking handler, a back door handle, even a screw driver. But the striker moves in no more than an 1/8 th of an inch. With the inside handle I get full travel of the striker. The locking handle works fine off the car with the key so that's not the problem. There has to be some problem in the door mechanism. I was told someone on the forum has a drawing of this locking mechanism. I sure don't want to take the door panel off on a freshly painted and upholstered car. Can anyone help. Thank John 352 208 6359 or [email protected]