The Ford Barn - View Single Post

Glenn C. · 07-04-2016, 10:30 AM

None of the sheet metal components will ever fit correctly until you have established that you have a true and square frame, also with no sag in the area of the rear engine mounts. You must measure the frame from corner to corner to determine if the frame is square. The frame condition is your top priority now.

07-04-2016, 10:30 AM	#3
Glenn C. Senior Member Join Date: May 2010 Location: Didsbury Alberta Posts: 838	Re: fit splash shield/r.fender: help ! None of the sheet metal components will ever fit correctly until you have established that you have a true and square frame, also with no sag in the area of the rear engine mounts. You must measure the frame from corner to corner to determine if the frame is square. The frame condition is your top priority now.