The Ford Barn - View Single Post - Throttle shaft brass plug for zenith carbs

Synchro909 · 01-11-2020, 02:41 PM

I seal that by putting some oil on the end of the shaft and some epoxy putty over it. The oil prevents the epoxy sticking to the shaft. It is on the hidden side of the carby and my car is a driver so that's fine by me.

01-11-2020, 02:41 PM	#3
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,495	Re: Throttle shaft brass plug for zenith carbs I seal that by putting some oil on the end of the shaft and some epoxy putty over it. The oil prevents the epoxy sticking to the shaft. It is on the hidden side of the carby and my car is a driver so that's fine by me. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.