Re: 1936 lower radiator hoses installation
Quote:
Originally Posted by Blastfromthepast
Hi swedishsteel, the problem isn’t that the hoses are falling off its when I put the lower hoses on and tighten the clamps I’m able to turn the hoses. It seem that I am unable to get them tight enough and I’m thinking that it will cause a leak. Also I noticed that the hoses are straight but the radiator is a little lower then the motor mounts water inlet causing the lower hose to pull down possibly causing a leak.
|
Sounds like the diameter of the hose is too large for the outlet.
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes.
It is better to be seen, than viewed.
"We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".
|