Quote:
Originally Posted by Blastfromthepast
I’m thinking dogleg means a bend in the hose?
They are straight hoses and wasn’t aware of the bend in the hoses
And who makes them
|
They have a slight bend in them. They are stock lower hoses for a 49-50 Ford V8/8ba. You can get them from any parts store that sells Gates hoses, Napa probably has them too.I used them on my 36 and they fit good.
Put them on dry, any sealer or silicone just allows them to slip,
Bill
PS The lower outlet/ motor mount is really short so using straight hoses and then pulling down on them would make it harder to keep them on.