The Ford Barn - View Single Post

Tom Wesenberg · 09-10-2019, 02:43 AM

Most likely it has a bad repro brake switch that grounds out. Disconnect both brake switch wires then connect an ohm meter from each terminal to ground and try the switch both off and on to see if either terminal connects with ground. If it does then you can take it apart and correct the problem.

09-10-2019, 02:43 AM	#10
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Fuse blows even when key off Most likely it has a bad repro brake switch that grounds out. Disconnect both brake switch wires then connect an ohm meter from each terminal to ground and try the switch both off and on to see if either terminal connects with ground. If it does then you can take it apart and correct the problem.