The Ford Barn - View Single Post

CA Victoria · 07-20-2020, 07:32 AM

I used two round (doughnut shaped) rubber furniture feet. They are made to mount with a bolt allowing for the nut to be recessed.
Could also screw 3/8 dowel to plate and slip a piece of vac. Hose over it.

07-20-2020, 07:32 AM	#5
CA Victoria Senior Member Join Date: Feb 2011 Posts: 2,113	Re: Front License Plate Hitting Radiator I used two round (doughnut shaped) rubber furniture feet. They are made to mount with a bolt allowing for the nut to be recessed. Could also screw 3/8 dowel to plate and slip a piece of vac. Hose over it. __________________ Tim Downtown, Ca