The Ford Barn - View Single Post - removing and separating the rear spring pack

rocket1 · 08-21-2018, 07:59 AM

Made my own spring spreader out of heavy walled pipe and 3/4 threaded rod,if you have a welder it is not difficult.I would c clamp and chain the spring before you remove center bolt,safety first.

08-21-2018, 07:59 AM	#10
rocket1 Senior Member Join Date: Mar 2014 Location: Midland Park,N.J. Posts: 1,108	Re: removing and separating the rear spring pack Made my own spring spreader out of heavy walled pipe and 3/4 threaded rod,if you have a welder it is not difficult.I would c clamp and chain the spring before you remove center bolt,safety first.