The Ford Barn - View Single Post - 31 AA Radiator Cap Blows Water at High RPM

Dick M · 09-25-2016, 10:35 AM

Have you been retorquing the head when the engine was hot? If so, it is not the torque settings but a problem with the head or head gasket. You will need to pull the head. You will be able to see if the head gasket has a break in it. If not, you will need to have the head magnafluxed. If your head is not worth fixing, I recommend you replace it with a Snyders 5.5 head. JMO

09-25-2016, 10:35 AM	#17
Dick M Senior Member Join Date: May 2010 Location: Ukiah, CA Posts: 477	Re: 31 AA Radiator Cap Blows Water at High RPM Have you been retorquing the head when the engine was hot? If so, it is not the torque settings but a problem with the head or head gasket. You will need to pull the head. You will be able to see if the head gasket has a break in it. If not, you will need to have the head magnafluxed. If your head is not worth fixing, I recommend you replace it with a Snyders 5.5 head. JMO