The Ford Barn - View Single Post

cas3 · 02-20-2020, 03:24 PM

also, the holes i plugged were in the block. 5 1/6, or 3/8 tap, i forget, allen head set screw locktite at deck surface or a smidge below

02-20-2020, 03:24 PM	#23
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,578	Re: A head on B engine also, the holes i plugged were in the block. 5 1/6, or 3/8 tap, i forget, allen head set screw locktite at deck surface or a smidge below