[Dick Carne]

Once you have determined that what you are looking at is indeed a Model A Mail Truck, then check to make certain that all of the metal hardware is intact. There are a few folks that have made random pieces for these old gentlemen, but for the most part, and given the limited number and treatment that these trucks received, it is not uncommon to find "projects" that are missing some of the metal hardware. In particular, look for tailgate hardware, sliding door (inside and outside) hardware, and door handles. The '29's have a horseshoe shaped metal ring (cowling) that goes around the gas tank and lower cowlsection, and on the 29 models, there is also an extra flange that goes between the lower portion of the cowl and the wooden front windshield post/front body post. You might also make sure that you have a garage access with at least a seven-and-a-half foot tall doorway. We have a '29 that is still in the restoration process, so if you do happen to "close the deal", I would be interested in talking with you further about these trucks. Thanks and good luck.