The Ford Barn - View Single Post

Steves46 · 10-09-2016, 03:17 PM

Thanks for the feedback. I placed a few drops of oil in the rear access but there are no previsions for the front. Tried the WD-40 but it did not quite anything down. My pumps were rebuilt by Skip and I did not notice any difference in resistance. Will try the new cogged belt when I receive it and if that doesn't work, will install a spare generator and see what happens. Replacing the belt is a lot quicker and easier than the generator. Other than this annoyance, the motor runs great..no overheating or charging issues.

10-09-2016, 03:17 PM	#7
Steves46 Senior Member Join Date: May 2010 Location: Lithia, FL Posts: 1,052	Re: Flathead Chirping at Temperature Thanks for the feedback. I placed a few drops of oil in the rear access but there are no previsions for the front. Tried the WD-40 but it did not quite anything down. My pumps were rebuilt by Skip and I did not notice any difference in resistance. Will try the new cogged belt when I receive it and if that doesn't work, will install a spare generator and see what happens. Replacing the belt is a lot quicker and easier than the generator. Other than this annoyance, the motor runs great..no overheating or charging issues. __________________ If it aint broke, don't fix it!