The Ford Barn - View Single Post

Pete · 10-06-2020, 08:35 PM

If need be, it is relatively easy to modify the pitman arm so it will go on in ANY position.
Just remove the master spline land.
The easiest way is a die grinder and a 1/4 inch carbide burr.
A cheaper way involves only a quarter inch square file and a half hour.

10-06-2020, 08:35 PM	#17
Pete Senior Member Join Date: May 2010 Location: Wa. Posts: 5,408	Re: Different Key ways?? If need be, it is relatively easy to modify the pitman arm so it will go on in ANY position. Just remove the master spline land. The easiest way is a die grinder and a 1/4 inch carbide burr. A cheaper way involves only a quarter inch square file and a half hour.