Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by woofa.express
I run a 6volt starter on my tourer but upgraded to a 12v system. the starter, unchanged at 6v, engages with a thud which is disconcerting. One person I consulted said remove 2 brushes from the starter. was this correct advise.
I might add the vehicle has broken two starter shafts and in time will possibly brake the current one too.
how do I address this??
with thanks in anticipation, gary
|
Gary-
Put 12 volt field coils in your starter and you're good.
When you hit the 6 volt starter with 12 volts, you are really winding it up, putting a load on the Bendix drive.