Quote:
Originally Posted by blucar
While reviewing "Randy's" contribution, #26 in this tread I noted that there is a faint weld line mid-way down the mount, this would indicate that the mount was cast in two pieces, then welded together. I also noted the the weld is in the same position as the 48-1434 (3) A mount I have............................
..................The mounting bases for both mounts are relatively flat, showing no sign of being concave, as it has been mentioned in earlier contributions.....................
|
Bill, I re-checked the 1935 Coupe mount previously shown in pictures above and it is definitely cast in one piece. The faint line I think you are referring to was only a stain of some sort which easily brushed off. This mount is also definitely concave about 3/16" on the side which meets the body.
-