Thread: Help to Identify Flywheel by Bolt Pattern
View Single Post
Old 04-20-2012, 09:19 AM   #4
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,440
Default Re: Help to Identify Flywheel by Bolt Pattern
A 3 1/8" spread indicates a 10" Long type pressure plate. The 11" was 3 3/8" spread C/C between pairs.
Last edited by rotorwrench; 04-20-2012 at 12:49 PM.
rotorwrench is offline   Reply With Quote