The Ford Barn - View Single Post - Help to Identify Flywheel by Bolt Pattern

Binx · 04-19-2012, 08:56 PM

I did a scrounge mission to Maryland last week and came up with an 8BA flywheel that I can't identify. I don't have pressure plates to compare to the pattern and have done my due diligence through the archives here, but no help. It is a Ford pattern with three paired holes. The paired holes measure 3 1/8" C/C and the spread between measures 7 7/8" C/C. I'm hoping this is for a 10" clutch.

Thanks for any info

Lonnie

04-19-2012, 08:56 PM	#1
Binx Senior Member Join Date: Oct 2011 Location: Gloucester VA Posts: 1,042	Help to Identify Flywheel by Bolt Pattern I did a scrounge mission to Maryland last week and came up with an 8BA flywheel that I can't identify. I don't have pressure plates to compare to the pattern and have done my due diligence through the archives here, but no help. It is a Ford pattern with three paired holes. The paired holes measure 3 1/8" C/C and the spread between measures 7 7/8" C/C. I'm hoping this is for a 10" clutch. Thanks for any info Lonnie