The Ford Barn - View Single Post

itsa52 · 01-20-2016, 02:07 PM

I had a bit of a problem restoring a couple of door mirrors,, SS heads had gravel dings, the glass was good, but crimped in so dissassembly odds were near nil to get in back of the SS and ding the dents out..
I found these guys Micro Weld America, in Fairview PA. They were able to fill the dents with weld, with near zero distortion, then finished and buffed, them.. All in all a super job, decent price and good handling and turnaround.

01-20-2016, 02:07 PM	#1
itsa52 Senior Member Join Date: Aug 2012 Location: Nebraska Posts: 603	A shout out, for Micro Weld America I had a bit of a problem restoring a couple of door mirrors,, SS heads had gravel dings, the glass was good, but crimped in so dissassembly odds were near nil to get in back of the SS and ding the dents out.. I found these guys Micro Weld America, in Fairview PA. They were able to fill the dents with weld, with near zero distortion, then finished and buffed, them.. All in all a super job, decent price and good handling and turnaround.