Re: New block
Made some pretty good progress this evening after supper. Most of the outside of the driver's side bank is finished as well as the front face and much of the rear. I messed a bit with the Siamese cylinders on one side to see what that might look like. The idea in my head will probably work. As the OD of the cylinder wall moves towards the bottom of the water jacket, I plan on stepping it down a couple of times. I will probably cut a rectangular window at 2 places after the uppermost diameter to allow as much coolant flow as possible. I will let it flow at the very bottom also so that nothing gets accumulated in any corners.
Tod
|