View Single Post
Old 09-26-2019, 11:15 AM   #38
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,367
Default Re: No reverse BW R-10

Are you sure that the reverse idler gear is inside the transmission? Make sure of that and make sure the shift rail isn't stuck all the way to the rear. Well nix that idea since it would make it work all the time so that won't affect it. It has to be all the way back to lock it out and it has to be locked out to go into reverse. If the reverse idler is missing then it won't go into reverse.

This also brings up a possibility that it might have a counter shaft cluster gear that isn't correct tooth count. Something isn't letting it rotate in reverse.

Last edited by rotorwrench; 09-26-2019 at 11:27 AM.
rotorwrench is offline   Reply With Quote