Thread: bleeding brakes
View Single Post
Old 09-12-2019, 05:07 PM   #17
john in illinois
Senior Member
john in illinois's Avatar
Join Date: May 2010
Location: Illinois
Posts: 1,853
Default Re: bleeding brakes

I use a pressure bleeder. Pump to 10psi. Walk around to each wheel with clear bleeder hose and open until no bubbles. I usually do it twice. You never need to worry about getting air or running out of fluid in the master cylinder.

I use a C clamp to hold adapter. Other adapters available.
I see Bill has same idea.

Attached Images
File Type: jpg 5CA1175A-1F13-4EC8-8266-05DEF076523E.jpg (64.7 KB, 27 views)
Welcome each day

Last edited by john in illinois; 09-12-2019 at 05:16 PM.
john in illinois is offline   Reply With Quote