06-26-2019, 04:31 PM
|
#7
|
|
Senior Member
Join Date: May 2015
Posts: 8,137
|
Re: 59AB Cooling System Advice Needed from the Experts (not an overheating issue)
Quote:
Originally Posted by JSeery
I wouldn't start taking anything apart unless you are sure there is an issue. In my opinion you are running the engine to cool, especially with a pressure cap. I would want it up in the 190 -195 range. If you run into the foam issue again I would try stright water and see if the antifreeze is the problem.
|
He says "Engine runs cool, 170-175 degrees in traffic or the highway."
This, with 180 degree stats he says are installed???
__________________
The only thing nice about being imperfect is the joy it brings to others....
"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969
https://www.youtube.com/watch?v=7NReUd2_0u0
|
|
|