The Ford Barn - View Single Post - 1955 ford Ranchwagon/ pitman arm shaft seal.

poolplayer1 · 06-03-2019, 06:39 PM

Ok, I have the leak on the steering box fixed. The engine has been completely rebuilt,everything new other than the block. I decided to replace the old fan with an electric fan. My question to you guys is: Which fan is best,the pusher or the puller.
I want to make sure that the rad.will be cooled pretty good,especially after I install the vintage Air cooling system. Thanks for your help.

06-03-2019, 06:39 PM	#4
poolplayer1 Senior Member Join Date: Sep 2015 Posts: 399	Re: 1955 ford Ranchwagon/ pitman arm shaft seal. Ok, I have the leak on the steering box fixed. The engine has been completely rebuilt,everything new other than the block. I decided to replace the old fan with an electric fan. My question to you guys is: Which fan is best,the pusher or the puller. I want to make sure that the rad.will be cooled pretty good,especially after I install the vintage Air cooling system. Thanks for your help.