View Single Post
Old 04-02-2014, 03:36 PM   #5
Ron in Quincy
Senior Member
 
Ron in Quincy's Avatar
 
Join Date: May 2010
Location: Quincy, CA.
Posts: 1,708
Default Re: Holly/Zenith carb

The Double Venturi carb used a idle jet #10 , a cap jet with the orifice at the bottom of the jet and a #10 compensating jet. As previously stated the main and cap jets are in line rather then off set like the later carbs.

The double venture is available from A&L Parts if you want one ?


They are a good running carb when properly rebuilt.

Ron
Ron in Quincy is offline   Reply With Quote