The Ford Barn - View Single Post

Purdy Swoft · 12-04-2018, 06:19 PM

The back side of the D nut needs to be struck with a hammer or some such and slightly brad . Brading will spread the tapered back side to hold the D nut in place . If you don't have the special tool , this can serve the same purpose .

12-04-2018, 06:19 PM	#3
Purdy Swoft Senior Member Join Date: May 2010 Location: Alabama Posts: 8,099	Re: D nuts The back side of the D nut needs to be struck with a hammer or some such and slightly brad . Brading will spread the tapered back side to hold the D nut in place . If you don't have the special tool , this can serve the same purpose . Last edited by Purdy Swoft; 12-04-2018 at 06:28 PM.