The Ford Barn - View Single Post

Tom Wesenberg · 12-08-2014, 04:12 PM

And after you install the flywheel housing and flywheel, be sure to mount the engine in your engine stand with the front down, then dial in the flywheel cover. Check it at 9, 12, and 3 o'clock positions. It should not differ by more than .006"

12-08-2014, 04:12 PM	#3
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Best way to install engine And after you install the flywheel housing and flywheel, be sure to mount the engine in your engine stand with the front down, then dial in the flywheel cover. Check it at 9, 12, and 3 o'clock positions. It should not differ by more than .006"