The Ford Barn - View Single Post

quickchange · 12-07-2014, 04:46 PM

19" correct but for a better ride, bigger print on the ground , 205-80- 8ply radials are the way to go. you don,t lose any gearing either. make sure they are 8ply fitted to toyota utes & nissen couple of years ago. tried normal ply radials & vehicle was all over the road, too soft in side walls of which you dont get on stockers , my old delivery sits as nice at 120K,s as a modern.At last national rally in NZ 35% ran them on the 16" 1935 v8 rims, 19" for show , 16" for go.

12-07-2014, 04:46 PM	#8
quickchange Senior Member Join Date: May 2010 Location: Nelson. New Zealand Posts: 2,026	Re: 16" to 19" wheels 19" correct but for a better ride, bigger print on the ground , 205-80- 8ply radials are the way to go. you don,t lose any gearing either. make sure they are 8ply fitted to toyota utes & nissen couple of years ago. tried normal ply radials & vehicle was all over the road, too soft in side walls of which you dont get on stockers , my old delivery sits as nice at 120K,s as a modern.At last national rally in NZ 35% ran them on the 16" 1935 v8 rims, 19" for show , 16" for go.