The Ford Barn - View Single Post

tubman · 12-03-2014, 02:57 PM

From what I have read, these have fallen out of favor lately. I would do some further research before I used one. It seems that it has to be RTV'ed in place to work and is no better than a properly installed rope seal. I have one I was going to use on my next rebuild, but will check it carefully when installation time rolls around.

12-03-2014, 02:57 PM	#2
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 11,639	Re: One piece pan seal From what I have read, these have fallen out of favor lately. I would do some further research before I used one. It seems that it has to be RTV'ed in place to work and is no better than a properly installed rope seal. I have one I was going to use on my next rebuild, but will check it carefully when installation time rolls around.