View Single Post
Old 11-17-2014, 10:21 AM   #12
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Pulled my Head to Look Inside the Top of the Engine

The rust got there because I used water after each overheat and rinsed the block with water at the begining of August, months before pulling the head. This engine hasn't turned since that time, so it sat around and got some rust. I'll clean it up when I take the engine apart. The main thing is to keep it oiled now so the cylinders don't rust over winter. My garage floor has a lot of road salt soaked into the concrete from my dad driving his cars in every day during the winter, and that salt really makes things rust. I layed down plastic and covered it with old carpet, but things still rust from the damp unheated garage. I wanted to spray ATF on the bottom of my Model A again, but the winter came much too soon.
Tom Wesenberg is offline   Reply With Quote