View Single Post
Old 11-15-2014, 04:36 PM   #16
FrankWest
Senior Member
 
FrankWest's Avatar
 
Join Date: Sep 2013
Posts: 3,157
Default Re: coil to distributer harness

I apolpgized for asking this qustion under Model A/
The model a has the ignation coil on the firewall engine compartment here only need 10 inches or so.
On my model B the ingnition coil is location under the dash inside the car.
And you need this harness
http://www.macsautoparts.com/ford_me...passenger.html

Having a 1933 car with basically a model A engine can be confusing at times...
But The 1933 model B engine was very reliable and almos as powerful as the early v8 which had many problem until approx 1935/36
FrankWest is offline   Reply With Quote