The Ford Barn - View Single Post

Ol' Ron · 10-02-2014, 08:19 PM

For those using the 21A rods, I cut the flanges off the early 32-37 bearings. Some of these are cad.silver and run forever properly set up

10-02-2014, 08:19 PM	#38
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,900	Re: 59 AB engine rebuild For those using the 21A rods, I cut the flanges off the early 32-37 bearings. Some of these are cad.silver and run forever properly set up