The Ford Barn - View Single Post

Rex_A_Lott · 09-20-2014, 12:23 PM

I've had good success using two wrenches for a 4" grinder. You may find the right size, or you may have to modify it. Good luck.

09-20-2014, 12:23 PM	#4
Rex_A_Lott Senior Member Join Date: Jun 2011 Location: Upstate South Carolina Posts: 794	Re: Adjusting valves I've had good success using two wrenches for a 4" grinder. You may find the right size, or you may have to modify it. Good luck.