The Ford Barn - View Single Post - Who can rebuild my AA Service Brake Cross Shaft?

spdway1 · 09-10-2014, 04:59 PM

I need the one piece bronze cross shaft bushings installed. First I need to make sure that the A one is the same for the AA.
FYI> Snyders only does the A ones, Bert's does not do them, Brattons gave me the ID of the bushing to measure my shaft to see if it fits. That is my next step, unless you know for sure.
This AA stuff is a tricky with the cross over of parts from the A, I am trying to figure out the front end now. I am told the steering ball studs are larger for my AA??

09-10-2014, 04:59 PM	#8
spdway1 Senior Member Join Date: Feb 2011 Location: Chicopee, MA Posts: 1,493	Re: Who can rebuild my AA Service Brake Cross Shaft? I need the one piece bronze cross shaft bushings installed. First I need to make sure that the A one is the same for the AA. FYI> Snyders only does the A ones, Bert's does not do them, Brattons gave me the ID of the bushing to measure my shaft to see if it fits. That is my next step, unless you know for sure. This AA stuff is a tricky with the cross over of parts from the A, I am trying to figure out the front end now. I am told the steering ball studs are larger for my AA??