The Ford Barn - View Single Post - Who can rebuild my AA Service Brake Cross Shaft?

BRENT in 10-uh-C · 09-09-2014, 07:14 PM

Describe exactly what you are needing.

FWIW, I started fabricating a spring hanger centering adapter where I could weld up the rear spring forward mounts (they rivet to the frame) and machine them in the lathe where the new bushings would be tight again. I kinda got stalled on that project when my customer found a nice frame, but we could get started on that again if it would help anyone.

09-09-2014, 07:14 PM	#3
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,971	Re: Who can rebuild my AA Service Brake Cross Shaft? Describe exactly what you are needing. FWIW, I started fabricating a spring hanger centering adapter where I could weld up the rear spring forward mounts (they rivet to the frame) and machine them in the lathe where the new bushings would be tight again. I kinda got stalled on that project when my customer found a nice frame, but we could get started on that again if it would help anyone. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .