The Ford Barn - View Single Post

19Fordy · 08-28-2014, 04:29 PM

99% of it is NOT attached to the firewall, except for the circuit breaker which is screwed to the firewall. The wiring harness comes thru the firewall and the wires just plug into the dash. There is no specific route as the wiring harness wires are cut to the correct length so they fit. There are no special clamps to hold the wires, as I recall. It will become self evident once you start to plug in the wires to each component.

08-28-2014, 04:29 PM	#5
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 11,603	Re: 40 ford under dash wire routing 99% of it is NOT attached to the firewall, except for the circuit breaker which is screwed to the firewall. The wiring harness comes thru the firewall and the wires just plug into the dash. There is no specific route as the wiring harness wires are cut to the correct length so they fit. There are no special clamps to hold the wires, as I recall. It will become self evident once you start to plug in the wires to each component.