Re: Can't seem to locate a growl
On the Fordbarn the pros here consider Tom Endy to be the master at rear ends, he has done hundreds of them.
This is a link to his methods; perhaps you will find it of some use:
http://www.ocmafc.org/techarticles/T...0Re-Edited.pdf
From the section on pre-load:
"Continue adding and subtracting gaskets until you can move the ring gear with your finger, or can measure 20-in. lbs.
on a dial indicator using the spider yoke tool"
__________________
'31 180A
Last edited by tbirdtbird; 08-24-2014 at 10:12 AM.
|