Thread: T-5 to flathead won't shift into gear with engine running.
View Single Post
Old 08-17-2014, 08:20 PM   #8
Init1
Senior Member
 
Init1's Avatar
 
Join Date: May 2010
Location: Oregon City, Oregon
Posts: 208
Default Re: T-5 to flathead won't shift into gear with engine running.
Quote:
Originally Posted by 35topdown View Post
Your bronze bushing might be the problem. It has no lubricating properties. You need an oilite bushing. It is oil impregnated and is the material that OEM bushings are made from. The bronze will gall up on the shaft and grab it keeping it turning.
It is an oilite bush from Speedy Bill.
Init1 is offline   Reply With Quote