Thread
:
Cylinder head identification
View Single Post
08-14-2014, 12:46 PM
#
10
Purdy Swoft
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
Re: Cylinder head identification
Probabably 4.22 or there about. Higher compression cast iron heads with original appearsnce of the past usually had heart shaped combustion chambers with compression ratios of 5.2 or somewhere close, more or less.
Purdy Swoft
View Public Profile
Send a private message to Purdy Swoft
Find More Posts by Purdy Swoft