Thread: Magnet cap screw Torque
View Single Post
Old 07-27-2014, 02:54 PM   #8
tmodelman
Senior Member
 
Join Date: May 2010
Posts: 580
Default Re: Magnet cap screw Torque
3/8" fine cap screw if Ford original used magnet clamp bolt is probably at best a grade 2 .

Torque would be way less than 40 lb. ft.!

Just snug it tight with a 3/8 socket wrench with a 8" handle, that is plenty.
Attached Images
File Type: jpg 44282.jpg (76.5 KB, 9 views)
File Type: jpg IMG_1579 (800x377).jpg (124.8 KB, 4 views)
tmodelman is offline   Reply With Quote