The Ford Barn - View Single Post

Tom Wesenberg · 07-21-2014, 02:05 PM

I agree that it must be the channels, but you still should grease the moving parts just before you reinstall the door panels. If you grease all the moving parts before you fix the tight window problem, you'll have grease everywhere. Have you tried spraying any silicone in the channels?

07-21-2014, 02:05 PM	#3
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: window regulator installation I agree that it must be the channels, but you still should grease the moving parts just before you reinstall the door panels. If you grease all the moving parts before you fix the tight window problem, you'll have grease everywhere. Have you tried spraying any silicone in the channels?