The Ford Barn - View Single Post

Tom Wesenberg · 07-16-2014, 02:35 PM

I've carefully pulled the wire through the lead seal, then lubed the speedometer and put the wire back through the lead. You may have to use a pin or needle to slightly enlarge the hole in the lead seal to get the wire back through it.

07-16-2014, 02:35 PM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Speedometer "lock" question I've carefully pulled the wire through the lead seal, then lubed the speedometer and put the wire back through the lead. You may have to use a pin or needle to slightly enlarge the hole in the lead seal to get the wire back through it.