The Ford Barn - View Single Post

bikemaniac · 07-08-2014, 12:57 AM

When measuring my relay I seem to have almost 0 Ohms everywhere. When inspecting the relay, the input and output holes/threads it seems there is no insulation so the body of the relay is touching everywhere. It looks like the body/house is pressed on top with a tight fit effectively making contact everywhere.

07-08-2014, 12:57 AM	#4
bikemaniac Senior Member Join Date: Aug 2013 Location: Copenhagen Posts: 177	Re: Cut out relay troubleshooting? When measuring my relay I seem to have almost 0 Ohms everywhere. When inspecting the relay, the input and output holes/threads it seems there is no insulation so the body of the relay is touching everywhere. It looks like the body/house is pressed on top with a tight fit effectively making contact everywhere.