The Ford Barn - View Single Post

Ron/IA · 07-01-2014, 08:44 AM

I am guessing, but could the new impeller move water at a different rate than the old one? Also, the aluminum fan may let air move a at different rate too. Could you compare parts; old versus new?

You state it runs hotter; is this from a reading using a temp gauge, or some other method?

Good luck figuring it out. I am sure others can give you more info.

07-01-2014, 08:44 AM	#2
Ron/IA Senior Member Join Date: May 2010 Location: Amana IA Posts: 527	Re: rebuilt water pump runs hot I am guessing, but could the new impeller move water at a different rate than the old one? Also, the aluminum fan may let air move a at different rate too. Could you compare parts; old versus new? You state it runs hotter; is this from a reading using a temp gauge, or some other method? Good luck figuring it out. I am sure others can give you more info. __________________ Ron/IA 1929 Fordor Steelback Hawk A Model A Ford Club http://hawkamodelaclub.org/