View Single Post
Old 06-28-2014, 11:24 AM   #5
Duffy1
Senior Member
 
Join Date: May 2012
Location: Mo. City , Texas
Posts: 725
Default Re: Radiator Question

You could send it back to Brass works and see if they can clean it up and at the same time make it where you can put a 4 psi cap on it and run a closed over flow system . My set up is just like yours and I have a brass works pressurized radiator and run AC . 95 degrees out side 60 mph no problem . Temp reads 185 degrees.
Duffy1 is offline   Reply With Quote