The Ford Barn - View Single Post - Needle & Seat

29 Tudor · 06-12-2014, 08:19 PM

Rex A Lot: I realize I don't need 93 in the "A". I was using that to TRY to get fuel with little to no alcohol.

Mikeinnj: No, no filter but the tank is spotless and I DO have the original cast iron sediment bowl as well as the screen in the inlet of the Zenith. Both are, and stay, clean. As I outlined in my data above, I have plenty of flow when the engine/fuel is cool. The problem occurred when the engine/carburetor was hot. I could actually HEAR the fuel boiling in the carb after I shut the engine off and opened the hood.

06-12-2014, 08:19 PM	#48
29 Tudor Senior Member Join Date: Apr 2011 Location: Magnolia, TX Posts: 161	Re: Needle & Seat - Now with some real data!! Rex A Lot: I realize I don't need 93 in the "A". I was using that to TRY to get fuel with little to no alcohol. Mikeinnj: No, no filter but the tank is spotless and I DO have the original cast iron sediment bowl as well as the screen in the inlet of the Zenith. Both are, and stay, clean. As I outlined in my data above, I have plenty of flow when the engine/fuel is cool. The problem occurred when the engine/carburetor was hot. I could actually HEAR the fuel boiling in the carb after I shut the engine off and opened the hood.