The Ford Barn - View Single Post

Patrick L. · 06-07-2014, 01:17 PM

There are a number of ways to install the Signal Stat units [ either 800 or 900].

But it would seems that you would want to have running lights just as running lights and the turn and stop lights operate together as one. There should be more than one diagram with the unit. I installed an old 900 unit in the A years ago and just tested each wire and sent it where it needed to go. There is no need to add extra lights unless thats what you want to do.
In the old days it was common to have to install these units, maybe the newer ones have changed, I don't know. There are not hard to put in and get working.

06-07-2014, 01:17 PM	#8
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Turn signal and tail light problem There are a number of ways to install the Signal Stat units [ either 800 or 900]. But it would seems that you would want to have running lights just as running lights and the turn and stop lights operate together as one. There should be more than one diagram with the unit. I installed an old 900 unit in the A years ago and just tested each wire and sent it where it needed to go. There is no need to add extra lights unless thats what you want to do. In the old days it was common to have to install these units, maybe the newer ones have changed, I don't know. There are not hard to put in and get working.