View Single Post
Old 05-31-2014, 11:26 AM   #1
29tudorsedan
Member
 
29tudorsedan's Avatar
 
Join Date: Nov 2012
Location: D/FW, TX
Posts: 74
Default Schrader gauge question

I picked one of these gauges up working for $6 along with the leather pouch, and a tire at 35 psi was reading 20 on the gauge, I oiled the numbered shaft and it read perfectly for a short while and I can only guess what was left of the gasket on the inside disintegrated from the oil after it wicked up the shaft with a few uses because it just extends fully and leaks air now.

Does anyone have any experience with these? Are they repairable?

Removing the head from it I'm met with a red disc with a hole in the center, and I'm not sure if there is much I can disassemble from there.

What I'm thinking of if I can't get it apart is walking an o-ring up the shaft and hopefully it will seat somewhere farther up and stop the leak.

I don't have much in it, so if it can be fixed I'd give it a shot.

Thanks
Attached Images
File Type: jpg IMG_1320.JPG (189.4 KB, 32 views)
29tudorsedan is offline   Reply With Quote