The Ford Barn - View Single Post

DougVieyra · 04-18-2014, 08:54 PM

It is important to note that the 'Big' box covers the crank hole and does not allow for hand cranking. The smaller 'Craftsman' tool box (Denis4X4 post above) does allow for the use of a hand crank, but you may have to modify the crank handle to add length to get over the tool box.

The 'Big' box is listed on page 94 of Bert's Model A Center catalog - $190.
The 'Big' box is listed on page 295 of Sacramento Vintage Ford catalog. $245.

If unavailable, you might try contacting Alan Bennett : Ph: (818) 222-4432
or - Roger Sandmeier : Ph: (775) 782-3903
These guys made these type of boxes several years ago and may still have one 'kicking around'.

04-18-2014, 08:54 PM	#10
DougVieyra Senior Member Join Date: Sep 2012 Location: Eureka, California Posts: 1,733	Re: front tool box It is important to note that the 'Big' box covers the crank hole and does not allow for hand cranking. The smaller 'Craftsman' tool box (Denis4X4 post above) does allow for the use of a hand crank, but you may have to modify the crank handle to add length to get over the tool box. The 'Big' box is listed on page 94 of Bert's Model A Center catalog - $190. The 'Big' box is listed on page 295 of Sacramento Vintage Ford catalog. $245. If unavailable, you might try contacting Alan Bennett : Ph: (818) 222-4432 or - Roger Sandmeier : Ph: (775) 782-3903 These guys made these type of boxes several years ago and may still have one 'kicking around'. Last edited by DougVieyra; 04-18-2014 at 09:18 PM.