Thread: Rookie with an engine problem
View Single Post
Old 03-29-2014, 06:17 PM   #5
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Rookie with an engine problem
Here's a link to Herm's babbit pictures showing what the oil grooves and pockets should look like. I'd remove the main caps and file oil pockets in them as shown in Herm's pictures. See reply #9

https://www.fordbarn.com/forum/showth...+bearings+herm
Tom Wesenberg is offline   Reply With Quote