The Ford Barn - View Single Post

tbirdtbird · 03-27-2014, 08:37 PM

take a 3/8 fine thread bolt. grind off the threads about 3/8 of an inch. Carefully screw this bolt in where the pipe plug is that was mentioned above. Just snug. Don't forget to replace the pipe plug when done.

GET the manuals for the car!!

03-27-2014, 08:37 PM	#5
tbirdtbird BANNED Join Date: May 2012 Location: inside your RAM Posts: 3,134	Re: Rookie with an engine problem take a 3/8 fine thread bolt. grind off the threads about 3/8 of an inch. Carefully screw this bolt in where the pipe plug is that was mentioned above. Just snug. Don't forget to replace the pipe plug when done. GET the manuals for the car!! __________________ '31 180A